ZC Hunter
The ZC Hunter 1.7-12x50 is the " all-round riflescope " in the premium market which is perfect for both moving, driven and raised hide hunts.
With 23m field of view at 1.7x magnification, it gives the largest field of view in combination with a 50mm objective on the market. The magnification up to 12x and the 50mm objective lens it provides a detailed, high-contrast and sharp image even for precision shots in low light conditions or at twilight. The reticle in the first image plane with red/green illuminated dot or with diffractive illumination technology in the second image plane with extremely bright red illuminated dot simplify aiming in all lighting conditions. For 1.7 to 12x magnification adjustment, the eyepiece has a comfortable, easy-to-grip zoom ring. To improve the fast operability of the zoom, an “trow lever” is also available as an accessory.
The shooter can choose between a "classic" hunting adjustable turret with protective cap or a lockable ballistic turret with adjustable rings.
The combination with the powerful 7x zoom and reticle in the 1st or 2nd image plane makes the ZC Hunter 1.7-12x50 extremely powerful and multifunctional.
Ballistic Turret
We offer a ballistic turret for the ZC hunter in addition to the traditional click adjustment that is found under the standard capped turret. This extremely precise, easy to use system, made of high-quality aluminum, allows the user to calculate and select three separate ranges that are then set with the individual rings which have colored markings for rapid range adjustment without compromising the usefulness of the full mil adjustment scale.
The turret also comes with a locking function to prevent any unintentional adjustment when stalking through rough terrain or transporting the rifle.
This turret can be ordered with any ZC Hunter scope in any configuration, and if necessary be retrofitted later at our factory.
Reticle KP1
The KPl reticle in the first focal plane, developed in cooperation with master gunsmith Kurt Pritz, is the ideal reticle for raised hide and precision hunting shots allong distances. Theslim bars, which areetched into the glassusing precise laser processes, anda large and bright field of view withmaximum edge-to-edge clarity allow observation allthe way to las! shooting light. A special feature is the fact that the bars do not extend to the edge of the field of view, and thus do not block the edges of the field of view.For precision shooting al300 meters using common modern calibers, zeroing the center of the reticle for a suitable high point of impact al100 m allows the bottom reticle mark to beused as the hold point for 300 m.
Reticle 4A-iD
Zero Compromise Optics brings hunters the ZC 4A-iD reticle in the 2nd focal plane, a popular and common reticle for classic hunters. At 10x magnification, the horizontal bars are dimensioned in such a way that at a target distance of 100 metres, the distance (dimensioned below with X) corresponds approximately to the length of a buck (approx. 70 cm). Overall, the average distance at 10x magnification is 140cm/100m. The 1.5cm /100m centre dot at 10x magnification can be steplessly illuminated in red using diffractive digital illumination technology. Compared to other technologies, such as „Etch&Fill“, the light efficiency of the diffractive reticle is many times higher, as the illumination can be used specifically for shooting. This means that the illuminated dot can still be clearly seen even in sunshine or in the brightest lighting conditions!
Reticle MHR
The new Multi-Hunting-Reticle (MHR) from Zero Compromi-se Optic is a further evolution of the
classic hunting reticles 1,4 as well as 8 and was designed in cooperation with the German shooting
instructor Michael Gast. The MHR is the ideal addition to our new universal hunting scope, which
has amagnification range of1.7 to12x andisthusperfect forboth driven hunts and long-range shooting.
The MHR reticle in the 2nd image plane can be used with cover measurements at fixed magnifications
to make full use of the functions of the MHR reticle justas a reticle in the 1st image plane.An
extra function is the infinitely dimmable reticle illumination, which can be switched between red
and green illumination.
Specifications
| Torre Balística | Si or No |
| Focal Plane | SFP or FFP |
| Reticle | KP1 or 4A-iD or MHR |
| Rail Integrado | Sin Rail Integrado or Con Rail Integrado |
| Tags | |
|---|---|
| Tags | |